Keyboard Service

Kurzweil
Hammond
Leslie
Yamaha
Roland
Technics
Nord
Rodgers
Casio
Allen
Elka
Kawai
Hohner
Lowrey
GEM
Wurlitzer
Vox

619 464-9000

Over 20,000 Digital Piano, Keyboard & Organ Repairs Since 1975

Serving San Diego, Los Angeles, Orange, Riverside, and Imperial counties


SSP-3A Solid-state Preamplifier

SSP3a preamplifier

Replaces pre-amps used in most standard Hammond tone wheel consoles. Carefully designed to faithfully reproduce the response of the original tube pre-amp when it was new.

Eliminate the intermittent static, crackling, loss of volume, and general degradation of sound quality that can be caused by aging components in the original pre-amp.

STANDARD FEATURES:

  • Built in reverberation utilizing a full size Accutronics three spring delay line
  • Built in power supply
  • Built in Leslie 122 tremolo control circuitry, functions with original tremolo switch or TS-2
  • Built in power-on circuitry for 11 pin Leslies
  • Functions with original swell pedal and linkage or can be used with remote floor type pedal
  • For portable applications, a custom Ernie Ball volume pedal model EB-100K is available
$779.00
Our Price
Solid State preamp

WITH AUXILIARY AMPLIFIER CHANNELS

enclosure with input jacks, output jacks and level controls

Provides 2 additional amplifier channels and a separate enclosure with input jacks, output jacks and level controls. These channels may be used to play other keyboard instruments, rhythm units, etc. through their own amplification system, but under the control of the organ swell pedal. In addition, either input can be routed through the organ sound system by moving a jumper on the circuit board. When configured this way, the AUX-1 input will be expressed, and the AUX-2 input will be un-expressed.

$899.00
Our Price
Amplifier with Auxiliary channels

OPTIONS:

TS-2 TREMOLO SWITCH

Tremolo switch

Mounts in place of the lower left hand end block on standard Hammond consoles. Allows convenient rocker switch control of the tremolo function. Normally provided with a two position switch. Also available with a three position switch for use with Leslies designed with a stop function. Pre-punched mounting hole provided for addition of a reverb or other control in the same enclosure.

NOTE: When ordered along with the RV-1C or SSP-3A , the TS-2 can be supplied with the reverb control pre-installed in the end block cover.

$109.00
Our Price
Tremolo switch

ECHO / ENSEMBLE / MAIN SWITCH

Echo / Tremolo switch

Provides all the features of the TS-2 with the addition of a three position ECHO / ENSEMBLE / MAIN switch compatible with 4H echo kit tone cabinet switching.

$139.50
Our Price
Echo / Tremolo switch

TP-3B PERCUSSION CONTROL HEAD

By adding the TP-3B percussion control head, the percussion circuitry of the SSP-3 can be utilized to add B-3 type percussion to older consoles which did not originally have this feature.

$229.00
Our Price
Percussion control head

BASS, TREBLE, AND PERCUSSION LEVEL

Provides precise control over the organ's bass, treble, percussion and overall level. Mounted on the SSP-3A chassis, these controls allow the organ owner to set sound to his preference and not have to worry

$79.00
Our Price
Bass, Treble, and Percusion level

BTC-2A BASS, TREBLE, AND PERCUSSION LEVEL END BLOCK

Provides precise control over the organ's bass, treble, percussion and overall level. The BTC-2A mounts in place of either left end block and gives the organist the ability to tailor the sound while performing.

$259.00
Our Price
Bass, Treble, and Percusion level end block

EFFECTS LOOP

Provides a separate enclosure with line level effects send and return jacks for adding the effects device of your choice to the SSP-3A

$98.00
Our Price
Effects loop option for SSP-3A

Ernie Ball volume pedal

Configured with a 100K pot to work with the SSP-3A remote swell option. Allows accurate control of organ swell without the mechanical linkage. Connects to the SSP-3A via a single standard 1/4" patch cord.

$153.00
Our Price
Ernie Ball volume pedal

Trek II is a registered trademark of Trek II Products, Inc.
© Trek II Products, Inc., used with permission

Repairs on:

  • AceTone
  • Adagio
  • Aeolian
  • Akai
  • Alesis
  • Allen
  • Arp
  • Baldwin
  • Behringer
  • Bell Duovox
  • Bontempi
  • Carvin
  • Casio
  • Conn
  • Cordovox
  • Crate
  • Elka
  • Emminent
  • Estey
  • Farfisa
  • Fatar
  • Fender
  • Galanti
  • Galaxy
  • GEM
  • Gulbransen
  • Hammond
  • Hohner
  • Kawai
  • Kimball
  • Kinsman
  • Korg
  • Kurzweil
  • Leslie
  • Lowrey
  • M-Audio
  • Moog
  • Nord
  • Orla
  • Rhodes
  • Rodgers
  • Roland
  • Samick
  • Sequential Circuits
  • Silvertone
  • Solton
  • Suzuki
  • Technics
  • Thomas
  • Viscount
  • Vox
  • Wersi
  • Wurlitzer
  • Yamaha
  • Young Chang
  • Zachary
  • ..and others